The draw stops in this package consist of:
- (2) round stops
- (2) rectangular stops
- (2) slidable stops
- (2) screws
The round and the rectangular stops will get you to the ¼” draw length increment depending on where you’re at on your cam. The rounds work well toward the string while the rectangular stops work well towards the riser.
The slidable stops come with additional screws. They are meant to be installed with two screws for each stop. You can choose which end of the stop you want hitting the cable. One is larger and one smaller. Should deliver a slightly different feel at the wall.
When installing the slidable stops, lightly screw the screws until they stop. Once they are seated, add 1/8 of a turn. The plastic will act as a lock washer and keep the screws from backing out. Overtightening the screws will dig into the plastic and complicate adjusting the stops in the future. Good luck!
Made for the Bowtech Reckoning Gen 2 series of bows.
