Revolution Arrow Saw by Last Chance Archery Review

A high quality arrow saw is one of the most important tools an archery pro shop has. It has to stand up to a lot of use, must perform extremely well, and must be safe and easy to use. Some of the older saws on the market may be able to check off one or two of those boxes, but there hasn’t been a “complete package” until Last Chance Archery came up with the Revolution Arrow Saw. This saw is by far the best arrow saw to ever hit the market. Lets look at some of its features.

Features of the Last Chance Archery Revolution Arrow Saw

Lets take a look at some of the features of the Revolution Arrow Saw.

Water Drip Carbon Dust Reduction

Carbon dust is extremely bad for your health. To address this inhalation hazard, LCA utilized a water drip system that works in conjunction with a vacuum chamber that houses the cutting blade. With the use of a vacuum and a little water, LCA has raised the bar with safety!

Arrow Spinner/Arrow Squaring Hole

The Revolution Arrow Saw comes with a handy arrow spinner that also doubles as a means to square your arrow ends. With the saw side arrow spinner as close as possible to the saw blade housing, rest the arrow on the arrow spinning members and slide it into the arrow squaring hole for a quick tap against the spinning saw blade. This will square up the end of your arrows. Very nice feature.

Extruded Aluminum

The use of extruded aluminum offers excellent straightness and the ability to lock in the arrow length without a set screw “walking” the overall arrow length while it tightens against a frame. This one is a bit hard to explain but if you have have used a Cabelas, Apple or Weston saw, you know what I’m talking about.

Accessories

In our opinion, a must have for the Revolution Saw is the Precision Arrow Prep Kit. It can be mounted to the arrow saw itself or to a bench. It is a one stop prepping and cleaning station for your arrows before installing components.

Vacuum Adapter (a must have)

This adapter lets you connect almost any vacuum to the Revolution Arrow Saw. A great addition to your saw. Find them here. https://shootingitme.com/shop/

How to Use the Last Chance Archery Revolution Arrow Saw

It is actually very easy to use.  Follow these steps:

1. Adjust the length of the arrow by moving the arrow backstop and clamp to the desired length.
2. Fill the water reservoir with water
3. Start your vacuum that is attached to the vacuum port
4. Open the water valve
5. Turn on saw
6. Secure the nock end of the arrow into the arrow clamp
7. Cut your arrows
8. Square your arrows
9. Turn off the saw
10. Close the water valve
11. Turn off the vacuum

For more information on the Revolution Arrow Saw, visit the LCA website at https://lastchancearchery.com/.